Dynamix DW 2 FXO Manuale Utente Pagina 73

  • Scaricare
  • Aggiungi ai miei manuali
  • Stampa
  • Pagina
    / 217
  • Indice
  • SEGNALIBRI
  • Valutato. / 5. Basato su recensioni clienti
Vedere la pagina 72
4.2.4 [reboot]
After commit command, type reboot to reload FXO GateWay in new
configuration. The procedure is as below:
usr/config$ reboot
Attached TCP/IP interface to cpm unit 0
Attaching interface lo0...done
AC4804[0] is OK
AC4804[1] is OK
AC4804[2] is OK
Successful
Initialize OSS libraries...OK!
open stack successful
cmInitialize succeed!
GK mode selected.
login:
4.2.5 [flash]
This command will clean the configuration stored in the flash rom and
reboot FXO GateWay in factory default setting.
Parameter Usage:
-clean clean all the user-defined value, and reboot FXO GateWay in
factory default mode.
Note: It is recommended that use “flash –clean” after application firmware
id upgraded.
Warning: Once users execute flash –clean, all the configurations of FXO
GateWay will be cleaned. This can only be executed by user who log in with
root
71
Vedere la pagina 72
1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 216 217

Commenti su questo manuale

Nessun commento